Industrial and construction projects are based on installed electrical systems which are tested and handed over based on approved design information. These aspects of power distribution, cabling, earthing, lighting, panels, equipment connections and control interfaces should be designed in such a way that they all are safe and accessible when needed and ready to operate as intended.
Best International Contracting Company offers electrical contracting services Saudi Arabia owners of projects, main contractors and industrial facilities can seek the services of the company to complete the specific demands of the project. New installations, extensions, modifications to plant, utility systems, building services, maintenance packages and activities of choice can be supported by our work.
Being an industrial electrical contractor that KSA customers can contact to select the appropriate packages, BIC evaluates the approved single-line diagrams, layouts, cable schedules, loads information, equipment data, inspection conditions, shutdown needs and required programme prior to the mobilisation. The design work of electrical work, authority approval and specialists work integration is only a part of the accepted contract when it is mentioned.
Electrical work relates very much closely to civil foundations, building openings, mechanical equipment, piping systems and process controls and operational shutdowns. An effective responsibility chart is needed prior to the commencement of work.
BIC aligns performance to approved drawings, material submissions, and installation information, workfront releases, inspection locations and energisation limits. Hidden work, underground paths and cable containment is introduced to undergo the necessary examination prior to being covered or sealed off.
When the conditions in the actual site do not coincide with the information given, it is through the project process that the work in question is referred to. On-site there are no changes allowed to cable sizes, protective devices, routing, equipment ratings and connection arrangements without approved technical direction.
Low-Voltage Power Distribution
BIC is allowed to support low-voltage approved distribution systems to fit appropriate industrial, commercial and construction projects. Examples of work include: distribution boards, panel connections, feeders, isolators, final circuits and equipment power interfaces.
The approved engineering package defines panel ratings, protective devices, cable sizes and fault levels, selectivity and operating philosophy. BIC mounts and links the designated system and in the scope of agreement.
Cable Tray, Ladder and Containment Systems
Organised routes of power and control and communication cables are offered by cable trays, ladders, conduits, trunking and associated containment. The layout and installation details should be adhered to in the supports, spacing, bends, segregation and access.
In cases where custom brackets or supports are needed, fabrication can be organized via the special Fabrication Services scope. Civil Works are coordinated with Major concrete supports, trenches and duct banks.
Power and Control Cable Installation
Cable work can comprise of receiving, drum check, route preparation, pulling, dressing, cleating, identification, glanding, termination and continuity check.
The length of the route, bends, tension that can be applied, and access of equipment and protection of the cable should be taken into consideration when pulling. The routes of power, control, communication and instrumentation have to be separated based on the approved project requirement.
Earthing and Bonding Systems
Earthing and bonding assists in controlling the potential of touch, fault paths and equipments reference status. The system can have earth electrodes, earth conductors, earth grids, earth test links, equipment bonding and connection to structural or system earth points.
BIC fits the approved set-up and facilitates the mentioned testing. The design of earthing-systems, soil-resistivity testing and expert calculation are only mentioned in case it is mentioned in the contract.
Lighting and Small-Power Systems
Lighting fixtures, switches, sockets, local isolators, emergency-lighting interfaces and distribution circuits may be considered as part of building and external electrical packages.
The positions of fixtures, mounting, circuiting, how the control is to be done, environment rating and ease of access to maintenance should be in line with the approved schedule. The design of lighting and emergency-system are left to the designer responsible unless they are contracted out separately.
Equipment Power Connections
Power is coordinated, isolated and controlled to motors, pumps, fans, package units, heaters and other equipment. Before connection cable entry, type of gland, termination arrangement and local-access needs must be verified.
Mechanical installation and alignment is still under Mechanical Works. The electrical package provides the electrical connection of the approved power and control interfaces when the equipment has been allowed to be used in electrical work.
Electrical Panels and Field Devices
Appropriate packages can have installation and connection of the switchboards, motor-control centres, local control panels and junction boxes, isolators and field devices provided to the project.
The manufacturing of factories, in-house panel design and certification of products stays with the certified manufacturer. BIC positioning, cable entry, fixing, external connection and site testing are all accepted within the scope of BIC.
Electrical Modifications and Brownfield Work
The current facilities might need cable rerouting and circuit extensions, panel changes, equipment replacement, extra lighting, new isolators or specific system upgrades.
Brownfield work involves approved drawings, isolation planning and control, access and a proper cutover or energisation plan. BIC only executes on the released work boundary, and is not executed on live systems unless under authorised control of the facility.
Projects can be provided with full approved engineering, or with specified construction drawings, routing of cables, end-of-line details, panel schedules or as-built updates. The engineering job needs to be agreed prior to quoting.
With the provision of engineering support, BIC can align appropriate construction deliverables under the basis of design and approved project information by the customer. These can consist of cable-routing plans, tray plans, termination plans, material take-offs, installation plans and marked-up as built plans.
Studies of systems, load flow, short-circuit, protection coordination, arc-flash evaluation, classification of hazardous areas, and submission of authorities are only done under special instructions upon the appropriate parties in engineering practice with due qualification.
The quality of electrical installation is based on its preparation, coordination of routes, proper materials and controlled termination. Releases of workfronts need to be done with the necessary civil, structural and mechanical interfaces.
Being an electrical installation contractor Saudi Arabia customers have the opportunity of negotiating appropriate packages, BIC pre-determines the materials, equipment, manpower, access, inspection phases and energisation limits, prior to commencement of field installation.
Checks of cable containment and equipment positions are done against existing drawings. Reporting of obstructions, clashes and inaccessible locations of work on maintenance is done in advance of permanent work done.
Cable Management, Identification and Segregation
The cables must be laid in a set of orderly paths with appropriate support, radius of bend, distance and shielding. Certain circuits of power, control, communication and sensitivity might need certain segregation.
The project naming convention should be used in cable tags, ferrules, labels on panels and to identify routes. The final handover system should not be temporary identification unless it is agreed upon by the customer.
Open cable ends are sealed by moisture, dust and damage prior to termination. Finished cables are not to be used as temporary supports, or to untrunked construction traffic.
Glanding, Termination and Connection Work
Cable, enclosure, approved connection detail, environmental rating and lugs, ferrules, terminals and sealing components must be appropriate to the cable.
The termination work must be properly prepared, correctly laid conductor, tightened and properly identified. Earth connections, shielding and armour connections should be as per the system requirement.
Connections are verified to be cleared and it is checked that access covers or enclosure doors are reinstated to its normal state after the inspection. Any damaged terminal, component missing or inappropriate entrance must be repaired and not covered up.
Industrial Electrical Works Jubail for Plant and Project Sites
Expansions of plants, utility buildings, warehouses, substations, equipment connections, lighting, and maintenance work and shutdown-related modifications may be considered as Jubail projects.
In the case of industrial electrical works Jubail requirements, BIC will review permits, access, operating limitations, cable paths, material staging, test areas, isolation requirements and turnover order, prior to mobilisation.
Activities within a working facility are synchronized with the electrical-safety regulations of the customer, lockout and tagout procedures, isolation authority and energisation, as well. BIC has no energisation or isolation of systems that are not part of the approved project set up.
Plant Electrical Contractor Saudi Arabia for Brownfield and Expansion Work
The electrical work of plants usually includes preexisting panels, incomplete documentation, overcrowded paths and devices, which cannot be shut down. The verification review of the site is used to verify the conditions that are available before the final decision to install or modify is made.
BIC can be used to assist cable rerouting, equipment connections, changes in lighting, local panels, isolators, additions to containment and chosen replacement work as a project team of plant electrical contractor Saudi Arabia that may need to get a specific set of requirements.
Any alteration to an energised distribution system, setting of protection, logic control or safety interlock must be approved by engineering and the facility must be authorised before proceeding.
Testing, Inspection and Pre-Energisation Checks
A check is done to ensure that the system installed is complete and ready to begin the subsequent project. The inspection and testing plan ought to determine the necessary checks, instruments, boundaries of the tests, duties and acceptance criteria.
Appropriate checks can be visual inspection, continuity, Insulated resistance, earthing continuity, earth resistance, Polarity, phase identification, cable checks and functional checks based on the requirement of the project.
Appropriate testing should be done with appropriate calibrated instruments where necessary. Results of the test are documented and inspected and energisation or commissioning is done.
Electrical Commissioning Services KSA
Commissioning is the process of ensuring that installed electrical systems are functioning as per project requirements within the approved limits of the project. It can involve pre-energisation inspections, verification of the panels, support of energisation of the circuits, inspection of the motor rotations, operation of lighting and confirmation of interface.
BIC would be able to offer KSA customers electrical commissioning services needed on definite systems and responsibilities. The authority to energise, to set protection settings and to start a process, to program a control-system and to give final operational acceptance all rests with the authorised customer or specialist except where otherwise indicated.
Activities that are commissioned must be approved in a proper order with communication, exclusion areas, emergency measure and release of each system documented.
Interfaces With Mechanical, Piping and Control Systems
There are numerous other fields that electrical work aids. Motors, valves, pumps, fans, heaters, package units and control panels need to be in coordinated location, connection details and dates of readiness.
Mechanical and piping teams will continue to be in charge of installing equipment, aligning and connecting processes. Electrical personnel finishes the approved power, control and earthing interfaces, once the equipment is released.
Only when mentioned in the contract, instrumentation, automation, fire alarm, access control, communication and specialist security systems are provided. Separate vendors might be needed to provide their software, programming and specialist commissioning.
Temporary Power and Construction Electrical Support
Temporary distribution boards, lighting, small-power outlets and supply routes of tools, offices and working areas may be needed in construction projects. Planning of the system should be in terms of load, protection, environment and changing site conditions.
The temporary installations need to be inspected and maintained during their use. Damaged cables, open connections, overloaded boards and extensions that are not approved should be fixed immediately.
Temporary generators and fuel systems are outside the as-accepted package of equipment unless provided in the accepted package.
Documentation, Labels and Handover Records
Installation cables, panels, circuits, tests and outstanding items can all be identified by electrical records which should enable the customer to do this. The necessary documentation will be based on the contract and system.
Examples of typical deliverables include cable schedules, termination records, test results, inspection reports, panel schedules, red-line drawings, and punch lists and as-built updates.
BIC organizes contractor-side documentation and the turnover with the agreed handover process. The ultimate acceptance is at the review of the customer and the completion requirements outlined in the contractual terms.
Safety and Energisation Controls
Electrical tasks may include work in proximity of live systems, stored energy, induced voltage, portable power, working at height, pulling of cables, lifting and handling of working equipment.
The project or facility procedures are involved in isolation, lockout and tagout, proving dead, earthing, barriers, permits and authorised switching. Live work is not considered to be a normal installation technique.
Energisation must be done after the necessary checks, clearances and approvals are done. During testing and start-up, access to panels, test areas and exposed conductors should be restricted.
1. Enquiry and technical review
We look at drawings, one line diagrams, cable schedules, equipment information, materials, test specification and due dates.
2. Site verification and interface planning
Routes, panels, equipment, location, civil interfaces, access, shutdown requirements and operating restrictions are evaluated where necessary.
3. Engineering and method preparation
The coordination of the contracted responsibility includes required construction drawings, cable routes, installation details, methods, inspection plans and material schedules.
4. Receiving of materials and preparation of workfront.
Checks and identification and preparation of installation Panels, cables, containment, fittings, glands, earthing materials and accessories are checked, identified and prepared.
5. Installation and termination
Installation of containment, cables, earthing, panels, field devices and equipment connections are installed in the approved package.
6. Inspection and testing
All necessary tests, such as visual checks, continuity, insulation, earthing and others, are done and documented.
7. Work of commissioning and corrective work.
The approved functional checks, energisation support as well as punch-item correction are accomplished within the specified system boundary.
8. Documentation and handover
Project handover is a compilation of test records, cable schedules, as-built information and turnover documents.
Petrochemical and Industrial Facilities
Power and lighting, earthing, containment, equipment connections and specification modification packages.
Warehouses and Logistics Facilities
Distribution, lighting, small power, panels, outside services and equipment connections.
Commercial and Industrial Buildings
Certified building electrical installations were in coordination with Building Works package.
Water and Utility Projects
Appropriate electrical systems of pumps, treatment systems, distribution systems and project utilities.
Infrastructure and Construction Projects
Lighting, power (temporary and permanent), cable routes and electrical-support needs.
Maintenance and Shutdown Projects
Determined replacement, isolation-based alteration, testing and renowned recommissioning assistance.
BIC treats electrical work as a technical package, which is controlled and relates engineering information, materials, installation, testing and handover. We establish system boundaries and responsibilities and mobilize.
Our associated civil, mechanical, piping and fabrication services assist us to learn multidisciplinary interfaces without integrating these individual services into this page.
We are able to contribute to new installation, extension, modification of brownfields, maintenance and chose commissioning needs of appropriate projects in Saudi Arabia.
Electrical Works Coverage Across Saudi Arabia
Electrical projects may be revisited to take up appropriate projects in Saudi Arabia. BIC helps in the needs of Jubail, Dammam, Khobar and the rest of the Eastern Province, whereas Riyadh and Jeddah projects and other areas can be evaluated based on the requirements of the system, quantities and access, shutdown and testing, mobilisation and programme.
BIC has the ability to audit power distribution, cable containment, cabling, earthing, lighting, panel installation, equipment connections, modification, testing and commissioning-support packages.
Detailed construction drawings, cable paths, schedules and installation specifications can be provided. Specialist calculations and studies of the system are contracted only on a case-by-case basis.
Yes. Appropriate packages may consist of pulling, dressing, cleating, tagging, glanding, termination and necessary testing.
Yes. The installation and testing of approved earth grids, electrodes, conductors, bonding and test connections may be installed within the agreed scope.
Yes. After installing the equipment and releasing it to the responsible mechanical team, electrical power, and control connections can be completed.
Pre-energisation checks, support of functional testing and energisation can be defined. Final operational acceptance and facility switching is also under authorised control.
When the verified information, approved isolation, access and modification procedures are at hand, it is possible to plan appropriate brownfield work.
These are generally coordinated under the umbrella of the Civil Works and were only included as they were assigned clearly by the joint proposal.
Custom supports are available and can be organized using Fabrication Services and can be a part of a combined offer when needed.
Submit approved drawings, single-line diagrams, cable schedules, equipment data and quantities, test requirements, site location and required programme.
Send out the approved electrical drawings, single-line diagrams, cable schedules, equipment information, quantities, test requirements, project location and programme. We will discuss with our team the engineering responsibility, materials, installation procedure, shutdown requirements, commissioning and turnover terms required to construct a well-organized proposal.
To install industrial electrical, to cable, earthing, to light, to panel work, to modify or to support the plant in commissioning in Jubail, in the Eastern Province or any other part of Saudi, contact Best International Contracting Company with the available project documents.
Have questions or need assistance? Reach out to us—we're here to provide the support and information you need, every step of the way.
Copyright © 2024 Best International Contracting Company, All rights reserved.
